Syntilor wood stain
5,95 €
Regular price
9,99 €
- Unit price
- /per
Stock
Quantity selected exceeds current stock
Tax included.
Check the conditions to get free shipping.
Water-based dye. 500ml Container
Easy-to-use wood stain that accentuates the grain. Allows subsequent application of other finishes such as varnishes.
As with any finish, it is highly recommended to do some testing of the result on a cutout of wood as close as possible to that which will be used on the job.
Useful data:
- Drying time: 2 hours
- Approximate coverage: 14 m² per liter (each coat)
- Application: 1 or 2 coats, depending on the shade you want to achieve.
- Cleaning tools: water
Preparation:
- If the wood is not new, remove the previous finishes with stripper or wax remover.
- Previously apply the protection products (anti-woodworm, for example) that are considered necessary.
- Before applying the stain, sand the wood to at least a medium grit (P120). All previous marks that may be on the wood (scratches, planer marks, saw marks, etc.) must be removed with the sandpaper. Finer sandpaper than P120 can be used, but will reduce stain absorption into the wood. After sanding completely remove any traces of dust.
Application:
- Shake the bottle before use.
- The use of gloves is recommended.
- Apply the dye with a brush or cloth in 1 or 2 coats depending on the tone you want to achieve.
- Remove excess with a cloth.
- Allow to dry 2 hours before applying the next layer or the finishing product (varnish).
Regulatory information:
Contains biocidal products: Contains 1,2-BENZISOTIAZOL-3(2H)-ONE May cause an allergic reaction.
Contains MIXTURE OF: 5-CHLORO-2-METHYL-2H-ISOTIAZOL-3-ONE; 2-METHYL-2H-ISOTIAZOL-3-ONE (3:1) May cause an allergic reaction.
Adding product to your cart